Light Weight OS2 Single Mode 100G & 400G High Density Fiber FDU Patch Panel
1. Product Description:
HD-Fiber Optic Patch Panels are applied to the data center. It is designed for the management of MPO-LC Module and MPO Adapter Panels. It can be installed in a 19-inch rack and cabinet.
With this High-Density Fiber Patch Panel, you can easily make one rack unit support your 10GB or higher applications. They allow you to quickly add new devices to your system without having to manually install or reconfigure other devices. The fiber is routed and connected on the inside of the cassette. There is no cutting, polishing, or terminating. These patch panels are perfect when you have high fiber count installations.
2. HD Fiber Patch Panel Features & Benefits:
- Near cable, manager includes cable management rings to help manage and route incoming fiber cables
- Sliding-type with Ergonomic design, convenient installation, and maintenance
- Radius protected patch cord routing, easy for cable management and improved density
- The module box can be installed or removed from the front or rear of the distribution frame
- 3* 16F module or 3*6-port adapter panels in each layer
3. HD Fiber Patch Panel Applications:
- Telecommunications subscriber loop
- Fiber to the home (FTTH)
- LAN/WAN/CATV
- Optical communication system
- High uniformity
4. Specification and Technology Parameter
| Product | HD 2U Fiber patch panel |
| Material | Cold-rolled steel sheet |
| Cassettes | 4 pcs MPO Cassettes |
| Max Capacity | 288 Cores |
| Adapter | LC adapter, MPO adapters |
| Colors | Black |
| Patch cord Qty | 1x24fo, 2x12Fo ,1x12 Fo |
| Fiber Mode | G657A1, OM1,Om2,Om3,Om4 |
| Panal Height | 2U |
5. Frequent Q&A For HD Fiber Patch Panel:
Q: What are the benefits of using a patch panel?
A: Patch panels will allow testing routing and maintenance of network cables connected to your network. With a patch panel this is quickly done just by making changes to cables on the patch panel itself. Patch panels also allow for easier cable management and identification of cable routing.
Q: What is a rack unit?
A: A rack unit U or RU is a unit of measure that describes the height of equipment designed to mount in a rack. A rack unit is 1.75 inches. Typically one rack unit will take three vertical screw holes on each side of a standard rack.
Q: Can I use any fiber patch cable in my network with my enclosure?
A: If your fiber enclosure is loaded you must have cables that are compatible with the included adapters. For unloaded enclosures you must select adapter panels which correspond to your fiber connector type or use a splice tray for single- and mass-fusing.
Q: What are the differences between the fiber connectors?
ST- Uses a push and turn to lock system
SC- Has a molded plug casing with push and pull locking system
6. HD Fiber Patch Panel Other Types:
Product Tags:
|
|
OS2 Single Mode 400G FDU HD Patch Panel Images
|
